Nanoskin Magic Scrub works fast and achieves professional results with the new advanced high density polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the Magic Scrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the Magic Scrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
*For surface prep., use with Nanoskin Glide Instant Spray Lubricant
*To achieve best result on the paint, use with Nanoskin Nano Shock Hydrophobic
Spray Lubricant Sealant.
*For glass prep. and hydrophilic anti-static sealant, use with Rain Prep GlassCleaner/Activator then follow with Rain Glass Sealant.Directions:Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.1. Thoroughly wash vehicle free of dust, sand, and dirt.2. Dilute GLIDE to desired strength. (2 oz. makes 16 oz. RTU.)3. Mist sufficient GLIDE onto the surface evenly.4. Polish the surface with dual action orbital polisher using light pressure (Low Speed).5. Wipe off residue and apply wax or glaze.NOTE:
- Using with 6" soft-edge DA pad is highly recommended.
- Sufficient lubrication is crucial to the MAGIC SCRUB application.
- Plain water is NOT an adequate lubricant.
- DO NOT use with rotary polisher.
- Magic Scrub is not solvent resistant.
- Remove tar & grease before application